In
conjunction with Lightolier, Lightolier Controls has developed a line of
dimmers that specifically operate with Advance® AmbiStar® dimmable fluorescent
ballasts that are used in Lightolier's Xceed™ fluorescent fixtures. These dimmers are offered in three models to
fit virtually any application and need - from individual room to a system
solution to occupancy sensing control.
For Occupancy
Sensing Needs...IntelliSight® Occupancy Sensing Dimmer (ITSEBAU)
The
IntelliSight® ITSEBAU is a designer-style, multiple technology,
occupancy-sensing electronic fluorescent dimmer. Designed for today's
energy-conservation initiatives, the ITSEBAU combines the strengths of a dimmer
with an occupancy sensor. The dimmer is designed to control Advance® AmbiStar
Fluorescent Dimming Ballasts when used in 120VAC or 277VAC applications. Each
unit has an automatic shut-off feature and provides multi-location on/off (three-way)
control when used with the Lightolier® Controls ITSRB Remote.
Attractive
designer styling which complements other designer-style electrical devices
and faceplates.
Controls
Advance® AmbiStar Fluorescent Dimming Ballasts for present and future
energy initiatives.
Multiple
technologies to improve sensitivity and decrease false triggering,
creating a much user-friendly and custom device without creating
complexity.
Light level
adjustments which offer a full range of lighting levels, with preset
capabilities.
Manual
override capabilities which allow the lights to be adjusted to any level
without affecting the preset level(s), including full brightness.
Intelligent
self-adjustment mode which continuously monitors space and occupancy
patterns to self-adjust to the most efficient control of the monitored
space.
Adjustable
time-out period, including automatic.
Sensor
sensitivity settings to tailor switch to unusual spaces.
Universal
voltages of 120 and 277 VAC power with a single ground connection.
Ambient
light override capabilities to monitor ambient light levels preventing
switch from turning on if ambient light is above a certain level.
Power fail
memory - years of power failure memory for building sweeps and unplanned
power losses.
California Energy Commission's appliance efficiency regulations - Title 24 compliant for use in commercial and
residential applications.
For System
Dimming Control...MultiSet Pro® Fluorescent Dimmer (MSP600EBA)
The
MultiSet Pro® Electronic Dimmable Fluorescent Ballast Dimmer is a digital,
micro-touch preset dimmer, designed for fluorescent loads not exceeding 600VA
(see chart on back page). The unit is equipped with an automatic fade and LED
readout, providing full-function, three-way and multi-location dimming control
when used with Lightolier® Controls MultiSet Pro Channel Remotes. MultiSet Pro
Masters provide up to thirteen preset scenes within a network of up to 30
dimmers and masters. This unit is designed to control permanently installed
fluorescent loads equipped with Advance® AmbiStar ballasts at 120V.
As an
individual device, the MultiSet Pro Electronic Dimmable Fluorescent
Ballast Dimmer has the capability to recall two presets-a user-selected
"on" level and full brightness. However, with a MultiSet Pro Master, the dimmer
can recall up to thirteen preset scenes.
Manual
override-allows the lights to be adjusted to any level without affecting
the preset level(s).
Automatic
fade-gently turns the lights on and off, thereby preserving the unit's
lamp life.
Power failure
memory-a feature that returns the dimmer to the level of lighting the unit
held before the power failure occurred.
Full-Function
MultiSet Pro Channel Masters take control of up to four devices from
multiple locations and permit full-function dimming capabilities.
Full-Function
MultiSet Pro permit total dimming control of up to 30 dimmers and masters
on the network. In addition, they allow up to thirteen preset scenes.
Please note that MultiSet Pro Masters and devices are not phase-sensitive.
A total of
twelve fade rates, programmable by scene ranging from one second to one
hour.
Capable of
two-way communication between the master and the dimmer so that the system
On/Off status is always known.
For Individual
Room Control...Onset Fluorescent Dimmer (OS600EBA)
The
Onset® OS600EBA Electronic Dimmable Fluorescent Ballast Dimmer is a digital, micro-touch
preset dimmer, designed for use with permanently installed fluorescent loads
with Advance® AmbiStar ballasts at 120V. The unit is equipped with an automatic
fade and LED readout, providing full-function, three-way and multi-location
dimming control when used with Onset Remotes. Onset Masters and Master Remotes
have the ability to control up to four Onset dimmers simultaneously, offering
an economical way to create preset lighting scenes.
As an
individual device, the Onset Electronic Dimmable Fluorescent Ballast
Dimmer has the capability to recall two presets-a user-selected "on" level
and full brightness.
Manual
override-allows the lights to be adjusted to any level without affecting
the preset level(s), including full brightness.
Automatic
fade-gently turns the lights on and off, thereby preserving the unit's
lamp life.
Power
failure memory-a feature that returns the dimmer to the level of lighting
the unit held before the power failure occurred.
Full-Function,
Onset Remotes allow total dimming control from multiple locations.
To learn more about Lightolier and the new Xceed fluorescent fixtures, click the graphic below.
2828 Trade Center Drive, Suite 130B • Carrollton, Texas 75007 • Phone: 1.800.526.2731 (toll free)
