|
Through a thoughtful design utilizing multiple detection
technologies, IntelliSight® Occupancy Sensors are the first true sensors with
the intelligence to discern between actual human occupancy and the simple
movement of inanimate objects, thereby giving you the true energy savings you
desire. And with user-friendly features such as automatic calibration,
automatic shut-off, and a greatly extended sensing range, it is easy to see why
IntelliSight® Occupancy Sensors are unlike any sensor that
exists today.
IntelliSight® Dual-Circuit Switch
The IntelliSight® ITSABU is a dual-circuit Sensor Switch is rated for a 1000
watt loads to control incandescent, magnetic / electronic low-voltage,
magnetic / electronic non-dim fluorescent, cold cathode, general inductive, and LED loads when
used in 120VAC or 277VAC applications. This device prodvides bi-level switching in a user-friendly occupancy sensor. Click here to view the specification sheet.
IntelliSight® Two-Wire Switch
The IntelliSight® Two-Wire Sensor Switch is rated for a 1000
watt load to control incandescent, magnetic/electronic low-voltage,
magnetic/electronic fluorescent, cold cathode, general inductive, and LED loads when
used in 120VAC or 277VAC applications.
IntelliSight® Inductive Dimmer
The IntelliSight® Inductive Dimmer is designed to control incandescent,
magnetic low-voltage, cold cathode, and general inductive loads, along with
VA-rated dimming amplifiers, when used in 120VAC or 277VAC applications.
IntelliSight® PowerSpec® HDF Fluorescent Dimmer
The IntelliSight® PowerSpec Fluorescent Dimmer is designed
to control Lightolier® Controls PowerSpec® HDF High Performance Fluorescent
Dimming Ballasts when used in 120VAC or 277VAC applications.
IntelliSight® Electronic Ballast Fluorescent Dimmer
The IntelliSight® Electronic Fluorescent Dimmer is designed
to control Advance® Mark 10®, Osram® Sylvania Quicktronic® PowerSense®, or
direct-drive Fluorescent Dimming Ballasts when used in 120VAC or 277VAC applications.
Common Features
All IntelliSight® wall box occupancy sensors can be used in multi-location applications (that uses existing three-way wiring) and offer the following common features:
- Attractive designer styling - complements other
designer-style electrical devices and faceplates.
- Multiple technology - multiple technologies to improve
sensitivity (up to 4,000 square feet of coverage) and decrease false triggering.
This also makes a much more user-friendly and customizable device without
creating complexity.
- Intelligent self-adjustment mode - continuously monitors
space and occupancy patterns to self adjust to the most efficient control of
the monitored space.
- User-friendly adjustable time-out period from 1 to 30
minutes to automatic - no need to uninstall unit to program the unit.
- Sensor sensitivity setting - User configurable sensor
sensitivity to tailor switch to unusual spaces.
- Universal voltage - 120 to 277 Volts AC power with a single
ground connection. Minimum inventory, easy installation.
- Minimum load requirement of less than 5W (incandescent) and 25W (fluorescent).
- Selectable audible tones - device emits a selectable audible
signal before the lights shut off, allowing the occupant to maintain the ON
status, if so desired.
- Ambient light override - Can monitor ambient light to
prevent switch from turning on if ambient light is above a certain level.
- Power fail memory - years of power failure memory for
building sweeps and unplanned power losses.
- LED indicator - lights when sensor detects occupancy.
- Automatic air gap when lights are off. Can be locked for
maintenance.
- Reinforced lens - minimal protrusion from the wall, maximum
protection.
CAD Block and Written Specifications for IntelliSight Wallbox Occupancy Sensors:
|
